PE water supply pipe

Introduction of PE water supply pipe
PE water supply pipe inner wall is smooth, and does not change with the use of time, friction resistance is small, saving energy, pressure loss than steel pipe about 30%, can choose a smaller diameter than steel pipe. It has good hygienic properties, no additives, no possibility of polluting drinking water. The ISO standard grade polyethylene material is grade 0 (the lowest level), no moldy material. Compared with other commonly used plastic materials, polyethylene has much higher mold resistance, and long-term use does not deposit dirt.

PE pipes are suitable for conveying water under pressure for general use and drinking water under a nominal pressure of 1.6 MPa and a temperature not exceeding 40 degrees Celsius. There are mainly municipal water supply, building water supply, farmland irrigation, waterscape engineering and so on.

PE pipe comprehensive performance channel application | temperature resistance | low temperature embrittlement temperature is very low, can be used in - 40 60, winter installation and construction will not occur pipeline embrittlement.

Application of PE to water supply pipe
PE water supply pipe can be used for general purpose pressure water conveyance and drinking water transportation.
There are mainly municipal water supply, building water supply, farmland irrigation, waterscape engineering and so on. In the water supply pipeline project, the PE water supply pipe will eventually replace the UPVC pipe.